Zero Error Principle
"Quality is not an act, it is a habit." As Bakar Makina, we aim for excellence in every weld, every design detail and every test phase.
Absolute Precision
In Engineering
As Bakar Makina, our quality understanding is not just to control the final product, but to handle the entire process (design, procurement, manufacturing, assembly) as a whole. We have placed ISO 9001:2015 Quality Management System standards at the heart of our production center.
With the awareness that we produce high-risk process equipment, we ensure 100% compliance with international (ASME, EN, AD 2000) norms from material selection to final tests. Every project must successfully pass tests that simulate the most challenging field conditions before being delivered to our customer.
In line with our continuous improvement principle, we closely follow technological developments and modernize our manufacturing methods every day. We make our engineering power sustainable by increasing the technical competencies of our employees through training.
Ethical Values
Honesty And Transparency Are Our Basic Principles In All Our Processes.
Certification
Production With Quality Documents With International Validity.
Focus
Full Loyalty To Customer Specifications And Technical Requirements.
Sustainability
Environmentally Sensitive Production And Efficient Use Of Resources.
Traceability System
Every plate sheet, every bolt and every electrode entering our production line is registered in the system with a unique tracking number. In this way, even ten years later, we can report in seconds which casting the material in one of our equipment came from or which welder it was assembled by.
- Raw Material Tracking: Entry Of Material Certificates (en 10204 3.1) Into The System.
- Welder Traceability: Matching Weld Seams On The Part With The Welder's Stamp.
- Process Records: Historical Record Of Painting, Heat Treatment And Test Phases.
Welding Quality (wps/wpqr)
Welding quality is vital in pressure vessel manufacturing. All welding operations within Bakar Makina are carried out according to pre-approved WPS (Welding Procedure Specification) documents. Our welding method tests (WPQR) are approved by independent organizations (TÜV, Turkish Lloyd, etc.).
- Method Approval: Approved Wpqrs For Different Material And Thickness Combinations.
- Certified Personnel: Welders Who Pass Periodic Tests According To En 9606-1 Standard.
- Ndt Controls: 100% Radiographic Or Ultrasonic Testing Capability.
Testing And Validation (fat/sat)
Our equipment is subjected to comprehensive performance tests before leaving the factory (FAT) and when being commissioned in the field (SAT). These tests prove that the design works flawlessly not only on paper, but also in the physical world.
- Hydrostatic Test: Leakage And Strength Control Under 1.5 Times The Operating Pressure.
- Dimensional Control: Compliance Check With Design Tolerances Using Laser Measurement Devices.
- Automation Tests: Real-Time Testing Of Scada And Plc Scenarios.
Safety And Atex Compliance
We build facilities operating in "Hazardous and Explosive" environments such as defense industry and petrochemicals. In these facilities, ATEX 2014/34/EU directive is our main guide. Details such as Ex-proof material selection and grounding continuity are an integral part of our engineering.
- Zoning Analysis: Determination Of Explosive Atmosphere Zones (zone 0, 1, 2) Within The Facility.
- Ex-Proof Equipment: Selection Of Certified Motors, Valves And Sensors Suitable For The Environment.
- Hazop Applications: Identification And Elimination Of Risks At The Design Stage.
Quality Is A Promise
Behind every part, every weld and every design lies our engineering honor and the importance we attach to customer satisfaction. Full compliance with technical standards is the reason for Bakar Makina's existence.